Pci Modules - Fujitsu PRIMERGY BX300 Operating Manual

PCI Modules

Figure 38: Special cable
8.4 PCI Modules
The server blade Pentium
The PCI modules use the logical and electrical layers of the specification for the
PCI local bus. The PCI module are intended to be used in the server blade
®
Pentium M with addition of PCI (33 MHz or 66 MHz) or PCI-X low profile
expander controller card.
The PCI module will be attached to the server blade Pentium
and fixed to with seven screws.
Two PCI module types are available:
– LAN-PCI module
– FC-PCI module
You find further details for adding a PCI module to the server blade Pentium
in section "Adding PCI Module to the Server Blade Pentium® M" on page 88.
78
®
M can be expanded with a PCI module.
Rev. 8.0
The Server Blade
®
M via a connector
A26361-K863-Z102-8-7619
®
M