Table of Contents
Advertisement
Installing the Hardware
1
USB/VGA connector on each server blade (see also figure 37 on
page 76).
Adapter connector for two USB ports for external CD/FD drives and one
VGA port.
I
A special cable is required! (see figure 38 on page 78)
2
2x uplink LAN connector on each installed LAN-PCI module (see also
figure 40 on page 79).
3
FC connectors on each installed FC-PCI module (see also figure 42 on
page 80).
4
PS2 keyboard connector (purple)
5
PS2 mouse connector (green)
6
Serial port connector on management blade 2 (see also figure 72 on
page 112).
Standard serial port, management communication port.
7
LAN connector on management blade 2 (see also figure 72 on
page 112).
LAN port, RJ45, 10Mb management LAN.
8
Serial port connector on management blade 1 (see also figure 72 on
page 112).
Standard serial port, management communication port.
9
LAN connector on management blade 1 (see also figure 72 on
page 112).
LAN port, RJ45, 10Mb management LAN.
10 VGA connector (blue)
11 3x uplink LAN connector on each installed switch blade (see also
figure 67 on page 104).
A26361-K863-Z102-8-7619
Rev. 8.0
Cabling the System
33
Advertisement
Table of Contents
