Upnp - Planet ICA-M3380P User Manual

Choose the RTSP port. The RTSP protocol allows a connecting client to
RTSP Port start a video stream. Enter the RTSP port number to use. The default value
is 554.
Specify the range of transmission port number of video stream. The default
range is 50000 to 50999. User can specify a number between 1024 and
RTP Port
65535.
1. To use the 3GPP function, in addition to the previous section, you might need
more information or configuration to make this function work.
2. The camera must be set as multi-profile mode, not mega-pixel mode.
Otherwise this device cannot serve 3GPP stream.
3. To use the 3GPP function, it is strongly recommended to install the Networked
Device with a public and fixed IP address without any firewall protection.
4. Port 554 is the default for RTSP service. However, sometimes, some service
providers change this port number for some reasons. If so, user needs to
change this port accordingly.
1.Choose a verified player (PacketVideo, QuickTime or Real player)
Dialing
2. Use the following URL to access: rtsp://host/mpeg4/media.3gp
procedure
Where host is the host name or IP address of the camera.
Compatible
Please contact your dealer to get the approved list of compatible 3G
3G mobile
phones.
phone

3.5.7 UPnP

UPnP is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. This device is an UPnP
enabled Internet camera. If your operating system is UPnP enabled, the device will
automatically be detected and a new icon will be added to "My Network Places." If you do not
want to use the UPnP functionality, it can be disabled.
In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT
traversal when your device is located on an intranet (LAN) and you wish to make it available
H.265 3 Mega-pixel Bullet IR IP Camera with Remote Focus and Zoom
50
ICA-M3380P