Planet ICA-M3380P User Manual page 67

Default Settings (Including the
network setting)
Default Settings (Except the
network setting)
Backup Setting
Restore Setting
Firmware Upgrade
H.265 3 Mega-pixel Bullet IR IP Camera with Remote Focus and Zoom
Recall the device hard factory default settings. Note
that clicking this button will reset all devices'
parameters to the factory settings (including the IP
address).
The unit is restarted and most current settings are
reset to factory default values. This action will not
reset the network setting.
To take a backup of all of the parameters, click this
button. If necessary, it will then be possible to return to
the previous settings if settings are changed and there
is unexpected behavior.
Click the "Browse" button to locate the saved backup
file and then click the "Restore Setting" button. The
settings will be restored to the previous configuration.
The device supports new firmware upgrade.
1. Close all other application programs which are not
necessary for firmware update.
2. Make sure that only you access this device at this
moment
3. Disable Motion Detection function.
4. Select "Firmware name"
5. Select the Firmware binary file.
6. Once the firmware file is selected, select
"Upgrade".
7. The
displayed on the screen.
67
Make sure that the Firmware only applies
to this device; once updated, it will be
burned into FLASH ROM of system.
upgrade progress information
ICA-M3380P
will be