Planet ICA-M3380P User Manual page 16

H.265 3 Mega-pixel Bullet IR IP Camera with Remote Focus and Zoom
Interface
alert and two-way audio.
The input power is 12V DC, 1A.
DC Connector
(The power adapter is not included in the package)

Connect the onboard LAN port to your local area network via
Ethernet cable. For connection to 10BASE-T Ethernet or
100BASE-TX or Fast Ethernet cabling, this Ethernet port built
auto-negotiation
transmission speed of the network automatically. Please use
Cat5e cable to connect the Network Camera to a 100Mbps Fast
RJ45 Port Ethernet network switch or hub.
(802.3af PoE)

1. LAN LED (green color):
This LED will flash while network is accessing via Ethernet.
2. Power LED (orange color):
When the camera is powered on, the LED will always be on.
This button supports two functions: "Restore to factory default
setting" and "Auto focus".

1. Turn off the camera first.
2. Press and hold the button continuously. Power on this
Reset Button

1. The camera should be powered on and ready.
Connecting to PC or Hub/PoE Switch
protocol
LED
ONLY use one power source, either from DC or
from 802.3af Power over Ethernet.
Restore to factory default setting
camera. Wait until the orange LED is turned on. It will take
about 30 seconds. Once the Camera is operational again, the
device has restored to default settings.
Restoring the factory default setting will lose all the
previous settings included IP address forever. User
needs to run the IPWizard II program to search the
device and configure it to let the device work
properly again.
Auto focus:
16
Description
can detect or
:
ICA-M3380P
negotiate the