Major Operating Controls And Their Functions; I Main Unit - Panasonic WV-CU650 Operating Instructions Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

I Main Unit

G Front View
!1
!3
!4
!7
!6
!5
!8
@0
!9
@3
@2
@1
!2
o
Note: Available functions differ depending on connected
devices.
q Operation indicator (OPERATE)
This indicator is lighting while power is supplied to the
system controller.
w Alarm indicator (ALARM)
This indicator blinks when an alarm is activated.
Blinking changes to steady light when the alarm is auto-
matically reset.
e Alarm suspend indicator (ALM SUSPEND)
This indicator lights up when an alarm is suspended.
r Shift button (SHIFT)
To activate the alternate function of each button, press
this button in combination with buttons associated with
special functions.
t Clear button (CLEAR)
Clears the parameter entered with numeric buttons.
10
#9 $0 #8
r
i u !0 y
ADJUST MENU
SHIFT
—
@4
$1 $2 $3 3
q w e t
WV-CU950
F1 F2 F3 F4 EXIT ENTER
SYSTEM CONTROLLER
CLEAR
ALM
OPERATE ALARM SUSPEND
STOP PLAY/PAUSE REC REC STOP
SHUTTLE
HOLD
REV FWD
+
@5 @7 @8 @6 @8 @8
(This is the illustration of WV-CU950.)
y Alarm reset/Alarm all reset button (ALM RESET/
ALM ALL RESET)
• In the PS·Data mode, this button cancels (resets) all the
alarm inputs at a time.
• In the terminal mode, this button cancels (resets) a
selected alarm input.
• In the terminal mode, when you press while holding
down the SHIFT button, this button cancels (resets) all
the alarm inputs at a time.
Note: ALM ALL RESET is reserved for future use.
u Alarm Acknowledge button (ACK)
This button acknowledges a selected alarm input, and
manual operation of alarm-related camera becomes
available.
Note: In the PS·Data mode, this function is reserved for
future use.
i Alarm/Alarm suspend button (ALARM/ALM
SUSPEND)
• When you press while holding down the SHIFT button,
this button temporarily stops alarm inputs to all the sys-
tem units. When an alarm is suspended, "ALM SUS-
PEND" indicator lights up.
$4
@9
#0
#1
#2
#4
#3
#5
#6
#7