Limitations Caused By Inverter Mode And Rating Selection - Omron MX2 COMPONET OPTION BOARD User Manual

Limitations Caused by Inverter Mode and Rating Selection

4-8 Limitations Caused by Inverter Mode and Rating Selection
Note 1
The Inverter mode and rating selection directly affects several aspects of the
Option Board usage. Refer to the MX2 User's manual section 3-6-24. The fol-
lowing table lists the most common consequences of the various Inverter
modes and ratings:
Table 22 Limitations Caused by Inverter Mode and Rating Selection
Inverter Mode and
Rating
d060
Rotational speed scaling 0.01 Hz
Torque-related registers
The Inverter will trip due to a cyclic mapping fault if you use torque-related
registers in the process area when not available.
Standard Induction Motor
Constant Variable
Torque Torque
0 (1-C) 1 (1-v)
Available Not available (see note 1)
Section 4-8
High Permanent
Frequency Magnet
2 (H-1) 3 (P)
0.1 Hz 0.01 Hz
29