To operate the 16 x 16 gear transmission, carry out the
following:
1. Start the engine and pull the HPL control lever (1) rear-
ward to lift the implement off the ground (if equipped).
2. Move the hand throttle lever (2) forward until the en-
gine speed is above 1500 RPM.
3. Depress the clutch pedal (3) fully.
4. Place the main transmission shift lever (4) shuttle shift
lever (5) and range lever (6) into the desired position.
5. Depress the brake pedals (7) and disengage the park
brake lever (8).
6. Release the clutch pedal (3) slowly, and the tractor will
start to move.
NOTE: Release the clutch pedal slowly, if the clutch pedal
is released fast it will cause the tractor to move suddenly.
NOTE: To change 1-4 gears depress the clutch pedal fully
and shift into the desired gear and release the clutch pedal
slowly.
4 - OPERATING INSTRUCTIONS
4-34
5
93100852