New Holland Boomer 47 Operator's Manual page 111

Starting procedure (HST model)
1. Push the hand throttle lever (1) forward to approxi-
mately the middle position.
2. Turn the key switch (2) to the middle "ON" position (A)
and check if the cold start (3) engine oil pressure (4)
and battery charge (5) indicator lights are illuminated.
3. Wait until the cold start indicator light (3) goes off, ap-
proximately three to twelve seconds, depending on
ambient temperature.
4. Turn the key to the extreme right to the "START" posi-
tion (B) . As soon as the engine starts, release the key
to allow it to return to the middle "ON" position.
NOTICE: Do not engage the starting motor continu-
ously for more than 10 seconds. Doing so may cause
starting motor failure.
5. Check if the engine oil pressure (4) and battery charge
(5) indicator lights are illuminated, the lights should
be off. If any of these indicator lights are illuminated,
shut off the engine immediately and check engine for
possible problem.
4 - OPERATING INSTRUCTIONS
4-21
8
NHIL13CT01005AA
9
NHIL13CT01006AA
10
NHIL14CT00054FA