New Holland Boomer 47 Operator's Manual page 102

Left-hand lift rod adjustment
WARNING
Crushing hazard!
Before disconnecting a lift rod from the lower
link, lower the attached implement to the
ground, and stop the engine. Make sure the
attached implement is correctly supported
and no pressure remains in the hydraulic
system before removing the lift rod securing
pins.
Failure to comply could result in death or se-
rious injury.
NOTICE: The left-hand lift rod (1) is adjustable but
must be removed from the lift arm before length can be
changed.
To lengthen or shorten the left-hand lift rod (1) remove the
bolt and nut (2) from the lift rod and lower link (3). Rotate
the top half of the lift rod clockwise to reduce the length
and counter-clockwise to increase the length.
Right-hand lift rod adjustment
NOTICE: The right-hand lift rod is readily adjustable even
when connected between the lift arm and lower link.
To lengthen or shorten the right-hand lift rod (1) lift the
handle up (2) and rotate clockwise to reduce the length
and counter-clockwise to increase the length.
Top link adjustment
To adjust the top link length, loosen the jam nut (1). Hold
the link end (2) and rotate the handle (3) on the sleeve to
lengthen or shorten the top link. After adjustment tighten
the jam nut to prevent unwanted rotation of sleeve when
in use.
4 - OPERATING INSTRUCTIONS
W0034A
4-12
1
NHIL13CT01249AA
2
NHIL13CT01249AA
3
NHIL13CT01249AA