Foldable ROPS
A foldable Rollover Protective Structure, is factory in-
stalled. Operate with this ROPS in the "UP" position
whenever possible. Use the ROPS in the "folded" posi-
tion only when absolutely necessary.
ROPS Folding Procedure
To fold the ROPS into the "DOWN" position
1. Remove retaining clip (1) from the pin (2) and remove
pin from the latching bracket, on both sides of the
ROPS.
2. Rotate the top part of the ROPS downward until the
brackets contact the ROPS uprights.
3. Reinstall pin (2) into lower retaining hole (3).
4. Secure the pin (2) with the retaining clip (1).
3 - CONTROLS AND INSTRUMENTS
3-4
2
NHIL13CT01021AA
3
93099328
4
NHIL12CT01017GA