New Holland Boomer 47 Operator's Manual page 19

What is Not Covered by the Emission Warranty
Please note that Emission Warranty does not cover:
1. Systems and parts that were not first installed on the
new equipment or engine as original equipment by
ISM
2. Part malfunctions caused by abuse, misuse, im-
proper adjustment, modification, alteration, tam-
pering, disconnection, improper or inadequate
maintenance, or use of nonrecommended fuels and
lubricating oils.
3. Damage caused by accident, acts of nature, or other
events beyond ISM's control.
4. Replacement of expendable items made in connec-
tion with scheduled maintenance.
What is Covered by the Emission Warranty
The following is a list of systems and parts that are considered a part of the Emission Control System and are covered
by the Emission Warranty for engines that were built to conform to CARB regulations:
IMPORTANT! This may not include expendable maintenance items. Emission related parts requiring scheduled main-
tenance are warranted until their first scheduled replacement point only.
PARTS COVERED
This emission control system warranty applies to the
following emission control parts.
• Fuel injection system
• Intake manifold
• Exhaust manifold
• Positive crankcase ventilation system parts (including
PCV Valve and Oil Filler Cap)
• Turbocharger (if equipped)
• Charge air cooling system (if equipped)
1 - GENERAL INFORMATION
5. Parts requiring replacement, inspection or adjust-
ment during scheduled maintenance intervals where
the part is not defective.
6. Parts that are not ISM Service Parts.
7. Loss of time, inconvenience, loss of use of equip-
ment/engine or commercial loss.
8. Equipment with an altered or disconnected hourme-
ter where the hours cannot be determined. Equip-
ment normally operated outside the United States.
9. Non-defective parts replaced by other than ISM deal-
ers.
• Smoke puff limiter (if equipped)
• EGR system (including EGR Valve, EGR Pipe and EGR
cooler) (if equipped)
• Intake throttle valve (if equipped)
• Exhaust aftertreatment system (if equipped)
• Aftertreatment Regeneration Device (if equipped)
• Miscellaneous hoses, clamps, connecters and sealing
gaskets or devices used in the above systems.
1-13