New Holland Boomer 47 Operator's Manual page 117

Park brake
WARNING
Equipment rolling hazard!
Firmly apply the handbrake. Stop the engine
before leaving the machine. The transmission
will not prevent the machine from rolling when
the engine is shut off.
Failure to comply could result in death or se-
rious injury.
NOTICE: Ensure the park brake is fully disengaged before
driving the tractor.
The park brake lever (1) is located on the left-hand side of
the operators platform. The park brake is used to secure
the brake pedals to prevent the tractor from moving while
parked.
To engage the park brake, lock the pedals together and
pull the park brake lever up while pressing the brake ped-
als down.
NOTE: Always engage the park brake when getting off the
tractor. If the park brake is not engaged or the operator
leaves the seat without engaging the park brake, a alarm
will sound. The alarm will continue to sound for approxi-
mately ten seconds or until the park brake is engaged.
To disengage the park brake, press the brake pedals
down and release the park brake lever by pushing button
(2) inwards and push the lever (1) down.
4 - OPERATING INSTRUCTIONS
W1144A
4-27
3
NHIL13CT01174AA