Tail/Brake Light Bulb; Turn Signal/Hazard Light Bulb - New Holland Boomer 47 Operator's Manual

Tail/brake light bulb

To replace a taillight bulb:
1. Remove the M6x16mm bolts (1),the plastic retainer (2)
and two M5 screws (3) that retain the taillight housing
(4) to the rear fender (5).
2. Push in on the brake/tail light bulb (6) or turn signal
bulb (7) and rotate counter-clockwise in the socket to
remove the old bulb.
3. Insert the new bulb into the socket and turn the bulb in
a clockwise direction until tightened.
NOTE: Replace brake/tail bulb (6) with a dual filament
21W/5W bulb. and turn signal bulb (7) with a single
filament 21W bulb.
4. Reinstall the taillight housing to the rear fender.

Turn signal/hazard light bulb

To replace the top flasher light bulb:
1. Remove the two screws (1) retaining the top flasher
light lenses and remove the lenses.
7 - MAINTENANCE
7-41
1
NHIL13CT01279AA
2
NHIL13CT01278AA
1
93100885