Datalogic 2 of 5 Set Length 1
This setting has no effect for AR models.
This feature specifies one of the bar code lengths for
Length
Mode, or the first fixed length if in
the bar code's data characters only.
The length can be set from 2 to 50 characters in increments of two. See
page 239 for more detailed programming instructions.
$CD2L1
Select Datalogic 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Control. Length 1 is the minimum label length if in
06 = Length 1 is 6 Characters
DEFAULT
Enter/Exit Programming Mode
Fixed Length
Mode. The length includes
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by dig-
its from the Alphanumeric characters in
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code again.
CANCEL
Datalogic 2 of 5
Variable Length
"Set Length 1"
on
Appendix D,
~
127