Abc Codabar Dynamic Concatenation Timeout; Abc Codabar Force Concatenation - Datalogic PD9330 Product Reference Manual

Enter/Exit Programming Mode

ABC Codabar Dynamic Concatenation Timeout

This parameter specifies the timeout in 10-millisecond ticks used by the ABC Codabar
Dynamic Concatenation Mode. The timeout can be set within a range of 05 to 255 in 10ms
increments. A setting of zero specifies no delay.
$CKBQI
Select ABC Codabar Dynamic Concatenation
Timeout Setting
Make a mistake? Scan the CANCEL bar code to
abort and not save the entry string. You can then start
again at the beginning.

ABC Codabar Force Concatenation

Forces labels starting or ending with D to be concatenated.
DEFAULT
$CCBFC01
ABC Codabar Force Concatenation = Enable
152
DEFAULT

To configure this feature, scan the ENTER/EXIT
bar code above, then the bar code at left fol-
lowed by digits from the Alphanumeric charac-
Appendix D, Keypad
ters in
desired character(s). End by scanning the
ENTER/EXIT bar code again.
10 = Quiet Interval of 200 ms
ABC Codabar Force Concatenation = Disable
PowerScan™ PD9330/PBT9300/PM9300
representing your
~
CANCEL
$CCBFC00 