Interleaved 2 Of 5 (I 2 Of 5); I 2 Of 5 Enable/Disable; I 2 Of 5 Check Character Calculation - Datalogic PD9330 Product Reference Manual

This setting has no effect for AR models.
The following options apply to the I 2 of 5 symbology.
CAUTION

I 2 of 5 Enable/Disable

When disabled, the reader will not read I 2 of 5 bar codes.
DEFAULT
$CI EN (CR)
I 2 of 5 = Enable

I 2 of 5 Check Character Calculation

This option enables/disables calculation and verification of an optional I 2
of 5 check character. Combinations of these settings are possible via the
Aladdin configuration utility, or contact Technical Support.
DEFAULT
I 2 of 5 Check Character Calculation = Check Standard
(Modulo 10) (no AR)
$
I 2 of 5 Check Character Calculation = Check DHL (no AR)
Product Reference Guide

INTERLEAVED 2 OF 5 (I 2 OF 5)

When reading this symbology, the settings for I 2 of 5 Length Control AND I 2
of 5 Check Character Calculation MUST be enabled to increase decoding
safety.
Enter/Exit Programming Mode
$
I 2 of 5 = Disable
$
I 2 of 5 Check Character Calculation = Disable
$ ( )
I 2 of 5 Check Character Calculation = Check German Parcel
115