Setup
Linking to a Bluetooth Adapter in HID mode
1. Install any drivers provided with the Bluetooth adapter.
2. Scan the
3. Use the host computer's Bluetooth manager to "Discover new devices"
4. Use a text editor to see incoming data on the port designated by the
Power Off
Scan the bar code below to shut off power to the handheld until the next
trigger pull
20
Link to PC in HID
and select "Datalogic Scanner." If you receive an error message, it may
be necessary to disable security on the device.
computer's Bluetooth manager.
The Powerscan BT9500 can be set up to require a PIN code when connecting.
If you want to set up a PIN, or when adding new equipment to a system that
uses a custom security PIN, please see
page 214 for more information.
. This function only applies to the wireless models.
label below.
Link to PC in HID
"Bluetooth PIN Code"
Power Off
PowerScan™ PD9330/PBT9300/PM9300
starting on