Enter/Exit Programming Mode
Mode Selection
This feature allows the PowerScan 16K model to operate in one of two basic
operative modes:
•
•
$CDISM00\r
Set Normal Mode
Quantity Field
This feature defines the behavior of the scanner if no data is entered in the
QTY field so that it is left empty. Options are:
•
•
•
$CPWEK00\r
Transmit code with default qty (1)
$CPWEK02\r
Discard Code
242
Normal Mode — data entered, either on the keypad or read via barcode,
is transmitted to the host once the enter key is pressed, following the
configured formatting.
Quantity/Code Mode — Can be further configured. See the next sec-
tions for Qty/Code operations. .
code is transmitted with default QTY ('1')
code is transmitted alone (without any quantity information)
code is discarded and an error beep is generated
DEFAULT
$CDISM01\r
Set QtylCode Mode
DEFAULT
$CPWEK01\r
Transmit Code only
PowerScan™ PD9330/PBT9300/PM9300