Plessey Set Length 2 - Datalogic PD9330 Product Reference Manual

Plessey Set Length 2

This feature specifies one of the bar code lengths for
Length 2 is the maximum label length if in
second fixed length if in
check, data, and full-ASCII shift characters. The length does not include
start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to
ignore this length (only one fixed length).
Table 29
instructions on setting this feature.
Table 29. Plessey Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT PLESSEY LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Plessey Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Fixed Length
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Plessey Length
Variable Length
Mode. Length includes the bar code's
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
Control.
Mode, or the
page 267 for detailed
50 Characters
'5' AND '0'
193