Menu Initial Setup - Furuno TZTBB Installation Manual

Menu item
[Bearing Display]
[True Wind Calculation Ref-
erence]
[Position Format]
[Loran C Station & GRI]
[Range (Long)]
[Range (Short)]
[Short/Long Change Over]
[Depth]
[Height/Length]
[Temperature]
[Boat Speed]
[Wind Speed]
[Atmospheric Pressure]
[Oil Pressure]
[Volume]
[Reset Default Settings]
3.2

Menu Initial Setup

This section shows you how to set your system according to the sensors you have
connected.
Drag the main menu, then select the [Initial Setup] to show the [Menu Initial Setup] sub
menus.
[Menu Units] sub menus
[True], [Magnetic]
[Ground], [Surface]
[DDD°MM.mmmm'], [DDD°MM.mmm'], [DDD°MM.mm'],
[DDD°MM'SS.ss"], [DDD.dddddd°], [Loran C], [MGRS]
[GRI]
[Master]
[First (Second) Slave]
[Correction First (Second)
Slave]
[Nautical Mile], [Kilometer], [Mile]
[Foot], [Meter], [Yard]
Set the distance at which to change between short and long range.
Set the long range here.
[Foot], [Meter], [Fathom], [Passi Braza]
[Foot], [Meter]
[Fahrenheit Degree], [Celsius Degree]
[Knot], [Kilometer per Hour], [Mile per Hour], [Meter per Second]
[Knot], [Kilometer per Hour], [Mile per Hour], [Meter per Second]
[HectoPascal], [Millibar], [Millimeter of Mercury], [Inch of Mercury]
[KiloPascal], [Bar], [Pound per Square Inch]
[Gallon] (Gallon & Gallon/hour), [Liter] (Liter & Liter/hour)
Restore default unit settings.
3. SETTING UP THE EQUIPMENT
Options
Select GRI code.
-
X: Upolu Point, Y: Kure Island
Enter a position offset to refine Loran C
position.
3-5