Furuno TZTBB Installation Manual page 24

3. SETTING UP THE EQUIPMENT
About menu operations
The following procedure shows how to use the menu system.
1. Press the
appears after the start-up screen appears.
2. Tap the Home icon (
bar appears on the menu selection display.
Menu icon bar
This icon appears
only when fusion
equipment is
connected.
3. Select (tap) the Menu icon (
340
330
320
310
300
0
0
240
230
220
210
200
Applicable screen shown so you can
see the result of certain selections.
4. Drag the main menus on the right-hand side of the screen. The current selection
is circumscribed with a yellow rectangle. The sub menus for the selected menu
appear.
5. Select the menu item to set from the sub menu.
There are four types of icons to indicate how to set a menu item, and each has the
unique function as shown on the next page.
3-2
key on the switch box to turn the power on. The chart plotter display
) at the top right-hand corner of the screen. The menu icon
0
350 10
20
30
40
50
60
120
130
140
150
160
190 170
180
Scroll mark (Indicates menus currently not shown on the screen.
You can see the menus currently not shown by dragging.
) to open the main menu.
Sub menus
Select [Close]
to exit menu.
Main menus
Menu currently selected