Furuno TZTBB Installation Manual page 13

2. Attach the DVI-D, Video composite and Audio cable connectors to their respective
ports.
DVI-D OUT0
Audio OUT
Video IN 1/2
3. Set the waterproofing gasket to the boot cover then pass the cables through the
boot cover.
4. Fasten the boot cover with four binding screws.
5. Attach the fixing plate to the boot cover.
6. Pass the cables through appropriate holes in the gasket. The largest hole is for
the DVI-D cable.
7. Set the cable adapter to the entrance of the boot cover.
8. Peel off the seal from the slots to be used on the fixing metal.
Fixing metal
9. Fasten the fixing metal to the boot cover with two binding screws.
Binding screw
(4 pcs.)
Binding screw
(2 pcs.)
Peel off the seal
from the slots to
be used
Waterproofing gasket
Boot cover
Fixing plate
Gasket
Fixing metal
2. WIRING
2-5