Wiring; Wiring Instructions - Furuno TZTBB Installation Manual

2.

WIRING

2.1

Wiring Instructions

MOD-WPAS0001-030+
(Supplied, 3 m)
DVI-OUT0
DVI-D/D S-LINK cable
(Supplied, 24 pin, 0.5 m)
LINE OUT
Video IN
1/2
Network 1/2/3
TO:
- HUB-101
(TL-CAT-012)
- DRS series
- TZT9/14/BB
- DFF series
- FUSION-Link
equipment
- Other sensor
2.1.1 NETWORK ports
TZTBB uses a standard TCP/IP Ethernet to share radar/sounder images and other
navigation information from devices connected to the network system. In any single
NavNet TZtouch network, a combination of up to six TZT series devices may be con-
nected to each other. All NavNet TZtouch network components have integrated regu-
lar RJ45 Ethernet port(s), three on TZTBB. The MOD-WPAS0001-030+ cable
(supplied) connects to equipment in the network.
DVI-IN
DVI-D for
External Monitor
(DVI-OUT1/2)
DVI-D/D
S-LINK cable
USB cable
Touch Monitor
MULTI Port
TO:
- External Buzzer
- Speed Alarm
- Power for CAN bus
- Event Switch
USB
1/2/3/4
Power TO: 12 - 24 VDC
MJ-A3SPF0017-050ZC, 5 m
Switch Box
(w/ 10A FUSE, supplied)
PSD-002
FRUDD-18AFFM-
L180 cable
CAN bus T-connector
(Supplied, 18 pin,
(SS-050505 FMF/
2 m)
NC-050505-FMF, option)
or
TO: FI-5002
Ground terminal
TO: Ship's ground
(IV-8sp., Local supply)
CAN bus CABLE
M12-05BM+05BF/
M12-05BFFM cable
(Option, 1/2/6 m)
2-1