Example Navnet Tztouch System Configurations - Furuno TZTBB Installation Manual

2. WIRING
2.3 Example NavNet TZtouch System Configura-
tions
Basic plotter/fish finder installation
The FURUNO GP-330B is connected to the CAN bus backbone cable, using the op-
tional NMEA data converter IF-NMEA2K2 (or IF-NMEA2K1). The DFF1/3 network
sounder is connected to the LAN port of the TZTBB using the standard supply cable
MOD-WPAS0001-030+(3 m) and a junction box TL-CAT-012.
GPS RECEIVER
GP-330B
Cable from GP-330B
Cable from
*
IF-NMEA2K2
12 VDC
NMEA DATA CONVERTER
IF-NMEA2K2
*Cable fabrication is necessary to connect
GP-320B and IF-NMEA2K2.
2-12
CAN bus backbone cable
CAN bus
drop cable
MULTI FUNCTION DISPLAY
TZTBB
(MPU-002)
12/24 VDC
Network Sounder
DFF3
LAN cable
MOD-WPAS0001-030+, 3 m
TL-CAT-012 Junction Box
LAN cable
(MOD-Z072)
DFF3 NETWORK SOUNDER
ST-BY
12-24 VDC
Low
High
Freq.
Freq.
Transducer