Identify The Drive By Model Number; Storage Guidelines - Baldor VS1MX Installation & Operating Manual

The VS1MX is an adjustable frequency PWM drive operating in V/Hz (volts per hertz) mode. This chapter contains
information about the VS1MX drive, including how to identify the drive.

2.1 Identify the Drive by Model Number

Each drive can be identified by its model number, as shown in Figure 2-1. The model number is one the shipping label and
the drive nameplate. The model number includes the drive and any options.
VS1MX 4
VS1 Family
Voltage Code
Hp Rated
1 = 115Vac 1PH
2 = 230Vac 3 PH
4 = 460Vac 3 PH
8 = 230Vac 1 PH
Power Rating
Hp Rated
0P5 = 0.5
1 = 1
2 = 2
3 = 3
5 = 5
7 = 7.5
10 = 10

2.2 Storage Guidelines

Follow these recommendations to prolong drive life and performance if storing the drive:
1. Storage ambient temperature is -40°C to 60°C.
2. Storage Humidity range 10% to 95% RH non-condensing.
3. Do not expose to corrosive atmosphere.
MN762
Figure 2-1 Drive Identification
MX Microdrive
kW Rated
-------
2k = 230Vac 3 PH
3k = 380-480Vac 3 PH
8k = 230Vac 1 PH
kW Rated
0P4 = 0.37
0P8 = 0.75
1P5 = 1.5
2P2 = 2.2
4 = 4
5P5 = 5.5
7P5 = 7.5
General Information and Ratings
10 - 4 TDF
Chapter 2
Options
T = Internal Brake Transistor
D = Disconnect Switch
F = EMC Filter
Enclosure
2 = NEMA 12 / IP55
4 = NEMA 4X / IP66
(For Indoor Use Only)
General Information and Ratings 2-1