Setup - CYBEX 525C Owner's Manual

Setup

Use the following instructions to setup the units settings.
1. Plug the optional power cord into a power outlet from a grounded circuit, See Electrical
Requirements. Coil up the remainder of the power cord and place it out of the way. If you do
not have the optional power supply, skip to step 3.
2. Verify the control panel will illuminate and is in Dormant Mode.
3. Hold the handrails to steady self while stepping into the pedals.
4. Begin pedaling.
Time and Date confirmation
The first time the unit is turned on, it prompts the user to confirm the current Time and Date. Quick
Start, Workouts, Setup or Stop will skip this requirement but it will appear again the next time the unit
is powered up until the time and date are properly set.
1. Press the ENTER
minutes (MM) and then AM/PM/24.
2. Press the UP
3. Press the ENTER
4. Press the UP
5. Press the ENTER
6. Press the ENTER
Continue this procedure for the Date. Date format is [YYYY] [MM] [DD]. Y - Year, M - Month and D -
Day.
7. Press the ENTER
displayed.
Time and Date confirmation complete.
Cybex Owner's Manual
key to begin editing the time, starting with the hours (HH) and then
and DOWN
keys to select the hour.
key to accept and begin editing the minutes.
and DOWN
keys to select the minutes.
key to accept and begin editing the AM/PM/24 hour setting.
key to accept time.
key after the final setting for Day. The opening screen will now be
27