Dmx512 Configuration - ACME CP-21TC User Manual

DMX 512 Address Setting
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to change the DMX 512 address.
is shown on the display. Pressing ENTER
7-
the display stops blinking or storing automatically one minute later. To go back to the
functions without any change press the MENU button again. If you use please refer to the
following diagram to address your DMX512 channel for the first 4 units.
3 channels：
4 channels:
6 channels:

5. DMX512 Configuration

Mode 1&2；
12-