Important Notes; Intended Use - Carl Valentin DYNACODE Operating Manual

Dynacode series

Important notes

1 Important notes
The Dynacode is equipped with 8 vector, 6 bitmap and 6 proportional
fonts. It is possible to print inverse, in italic format or 90 degrees
turned fonts.
The handling of our durable print module is easy and comfortable. The
settings are made with the keys of the foil keyboard. At each time the
two-line display shows the current status.
An enormously high print quality is obtained by most modern
printhead technology.
By a new-developed electronics a maximum print speed of up to 800
mm/s (continuous mode) and 600 mm/s (intermittent mode) can be
achieved. Time-saving update of the print module software is possible
via the interface. The print module can be adapted by the large
selection of options to each function.
As default, the print module is equipped with a parallel, serial, USB
and Ethernet interface. The device automatically recognizes by which
interface it is controlled.
Time-saving update is possible by interface.
Thanks to the large number of options the print module can be
adapted to each task.

1.1 Intended use

The continuous and intermittent operating Dynacode is a direct print
module with high resolution for installation in horizontal and vertical
packaging machines. Not only the easy to change ribbon cassette is
convincing but also different print widths, left and right versions and
because of the separate control unit it is possible to integrate the
Dynacode almost in each packaging process without any problems.
Flexible labelling of packaging foil is effected either by means of
Windows printer driver included in delivery or by our proven creation
software.
The direct print module is a state-of-the-art device which complies
with the recognized safety-related rules and regulations. Despite this,
a danger to life and limb of the user or third parties could arise and the
direct print module or other property could be damaged while
operating the device.
The direct print module may only be used while in proper working
order and for the intended purpose. Users must be safe, aware of
potential dangers and must comply with the operating instructions.
Faults, in particular those which affect safety, must be remedied
immediately.
The direct print module is solely intended to print suitable media which
have been approved by the manufacturer. Any other or additional use
is not intended. The manufacturer/supplier is not liable for damage
resulting from misuse. Any misuse is at your own risk.
Intended used includes heeding the operating manual, including the
maintenance recommendations/regulations specified by the
manufacturer.
10.15 Operating manual 5