Carl Valentin DYNACODE Operating Manual page 73

Dynacode series
Saving the
configuration
Changing the directory
Deleting file from
Compact Flash card
10.15
Keys: , , ,
Press key to select the 'Save configuration' menu item.
As standard, the proposed file name is config.cfg. This name can be
changed by the user. In this file the parameters of print module are
saved which are not saved permanent in the internal Flash.
Press key to start the saving procedure.
After the saving procedure, the display shows again the main menu.
Keys: , , ,
Press key to select the 'Change directory' menu item.
The lower line of display shows the directory which is selected at the
moment.
Press key and to change the directory in the upper line.
Press key and to show all available directories.
Press key to confirm the selected directory.
After changing the directory the display shows again the main menu.
Keys: , , ,
Press key to select the 'Delete file' menu item.
Select directory and/or layout you want to delete and confirm the
selection with key .
The selected layout is deleted from the Compact Flash card.
After the deleting procedure the display shows again the first menu
item 'Load file'.
Operating manual
,
, ,
Compact Flash card
73