How To Set The Date And Time - Cisco 7960G Administrator's Manual

How to Set the Date and Time

Procedure
Using an ASCII text editor such as vi, open the SIPDefault.cnf file.
Step 1
Step 2 Modify the following SNTP parameters as needed:
• sntp_mode
• sntp_server
time_zone
•
Modify the following common DST parameters as needed:
Step 3
dst_offset
•
dst_auto_adjust
•
dst_start_month
•
dst_stop_month
•
dst_start_time
•
dst_stop_time
•
Do one of the following:
Step 4
Modify the following absolute DST parameters as needed:
•
–
–
• Modify the following relative DST parameters as needed:
–
–
–
–
Save the file to the root directory of your TFTP server.
Step 5
To adjust the phone display to European Day-Month-Year format, add the following entry to the
Note
SIPDefault.cnf file: date_format:D/M/Y.
Cisco SIP IP Phone Administrator Guide, Release 6.x and 7.x
3-18
dst_start_day
dst_stop_day
dst_start_day_of_week
dst_start_week_of_month
dst_stop_day_of_week
dst_stop_week_of_month
Chapter 3 Initializing Cisco SIP IP Phones