New Information In This Release - Cisco 7960G Administrator's Manual

Product Overview
This chapter provides the following information about the Cisco IP 7960G/7940G phone:
•
•
•
•
•
•
•
•
•
•
•
•
•

New Information in This Release

Release 6.0
•
•
•
•
•
•
New Information in This Release, page 1-1
Cisco IP 7960G/7940G Phone Overview, page 1-2
Session Initiation Protocol Overview, page 1-6
BTXML Support, page 1-8
Cisco CallManager XML Support, page 1-8
Network Capabilities, page 1-9
Configuration Features, page 1-9
Signaling Support, page 1-10
Dial-Plan and Messaging Support, page 1-10
Routing and Proxy Support, page 1-11
Supported Languages and Character Set, page 1-12
Supported Protocols, page 1-13
Where to Go Next, page 1-14
New digital-signal-processor (DSP) firmware has been released.
DSP alarm-status and error-message-reporting capabilities are available using the debug dsp and
show dsp commands. You can log your session by means of console or Telnet and save the log to a
file.
New tones and ringers are added for interoperation with the Cisco BTS 10200 Softswitch.
Selectable tones and ringing patterns already known to the phone are available to use as alternate
ring tones.
Local call forwarding capability is added so that you can forward calls to a desired phone number
or URL.
Autoconnect capability that operates like an intercom is added. The lines that are in autoconnect
mode are displayed on the phone with an autoconnect icon.
C H A P T E R
Cisco SIP IP Phone Administrator Guide, Release 6.x and 7.x
1
1-1