Cisco 7960G Administrator's Manual page 172

Table 3
Parameter
Authentication Name
Authentication Password
Display Name
Name
Proxy Address
Cisco SIP IP Phone Administrator Guide, Release 6.x and 7.x
D-18
SIP Parameters
Appendix D Configurable Parameters for the SIP IP Phone
Description
(Phone-specific) Name used by the phone for
authentication if a registration is challenged by
the proxy server during initialization.
Required when registration is enabled and
Note
the registrar challenges registration.
(Phone-specific) Password used by the phone for
authentication if a registration is challenged by
the proxy server during initialization. If a value is
not configured for the Authentication Password
parameter when registration is enabled, the
default logical password is used. The default
logical password is SIPmac-address, where
mac-address is the MAC address of the phone.
Note Required when registration is enabled and
the registrar challenges registration.
(Phone-specific) Identification as it should appear
for caller identification. For example, instead of
jdoe@company.com appearing on phones that
have caller ID, you can specify User A in this
parameter to have User A appear on the callee end
instead. If a value is not specified for this
parameter, the Name value is used.
(Phone-specific) Description phone number or
e-mail address used when registering. When
entering a number, enter the number without any
dashes. For example, enter 555-0100 as 5550100.
When entering an e-mail address, enter the e-mail
ID without the host name.
(Phone-specific) IP address of the primary SIP
proxy server that will be used by the phone. Enter
this address in IP dotted-decimal notation.