Cisco 7960G Administrator's Manual page 166

Sip
Hide thumbs Also See for 7960G:
Table of Contents

Advertisement

Table D-1
Parameter
proxy_emergency
proxy_emergency_port
proxy_register
proxyx_address
proxyx_port
Cisco SIP IP Phone Administrator Guide, Release 6.x and 7.x
D-12
Configuration File Parameters (continued)
Description
(Optional) IP address of the emergency proxy server or gateway.
Enter this address in IP dotted-decimal notation.
(Optional) Port number of the emergency proxy server. Default
is 5060.
(Optional) The phone must register with a proxy server during
initialization.
Valid values are 0 (disable registration during initialization) and 1
(enable registration during initialization). Default is 0.
Note
Note
IP address of the SIP proxy servers that are used by the phones.
Enter the addresses in IP dotted-decimal notation or use the FQDN.
The "x" argument is representative of server addresses.
Valid values for "x" are 1 to 6. If the proxyx_address parameter is
provisioned with an FQDN, the phone sends REGISTER and
INVITE messages by using the FQDN in the Req-URI, To, and
From fields.
If the value of x is not specified in the proxyx_address parameter,
the phone uses proxy1_address as the default value.
Port number of the SIP proxy server that will be used by phone lines
other than line 1. The x variable represents a phone line.
Valid values are 2 to 6.
Note
Appendix D
Configurable Parameters for the SIP IP Phone
You can also use this parameter in a phone-specific
configuration file. After a phone has initialized and
registered with a proxy server, you can remove the
registration by changing this value to 0 in the phone-specific
configuration file. To reinitiate registration, change the
value back to 1.
If you enable registration and authentication is required,
you must specify values for the linex_authname and
linex_password parameters in the phone-specific
configuration file.
For additional phone lines, the proxyx_port parameter and
the proxyx_port parameter can be used to assign different
proxy addresses to different phone lines. The "x" in the
parameters represents a phone line. The value of "x" can be
from 1 to 6. If the value of the "x" is not specified in the
proxyx_address parameter, the phone uses proxy1_address
as the default.

Advertisement

Table of Contents
loading

This manual is also suitable for:

7940g

Table of Contents