Cisco 7960G Administrator's Manual page 43

Chapter 3 Initializing Cisco SIP IP Phones
• For a complete alphabetical list of configurable parameters, see
Parameters for the SIP IP Phone."
Procedure
Obtain the phone-specific configuration file as follows:
Step 1
Go to the Cisco.com SIP IP 7940/7960 phone software-download site at
a.
http://www.cisco.com/cgi-bin/tablebuild.pl/sip-ip-phone7960.
Download the SIP<mac-addr>.cnf file to the root directory of your TFTP server or to a subdirectory
b.
in which all phone-specific configuration files are stored.
Do the following for each phone that you plan to install:
Step 2
Using an ASCII text editor such as vi, create and open a SIP<mac-addr>.cnf file for the phone.
a.
Modify the following end-user call-preference parameters as needed to permit or deny end-user use
b.
or customization:
•
•
•
•
•
•
Modify additional parameters as needed.
c.
Save the file to the root directory of your TFTP server or to a subdirectory that contains all the
d.
phone-specific configuration files.
Name the file SIP<mac-addr>.cnf. Type the MAC address in uppercase and the extension, cnf, in
lowercase (for example, SIP00503EFFD842.cnf).
Configuration Example
The following is an example of the phone-specific configuration file that you downloaded from
Cisco.com.
# SIP Configuration Generic File
# Line 1 appearance
line1_name: 1234567
# Line 1 Registration Authentication
line1_authname: "UNPROVISIONED"
# Line 1 Registration Password
line1_password: "UNPROVISIONED"
# Line 2 appearance
line2_name: football
# Line 2 Registration Authentication
line2_authname: "UNPROVISIONED"
anonymous_call_block
autocomplete
callerid_blocking
call_hold_ringback
call_waiting
dnd_control
How to Customize a Phone-Specific Configuration File
Appendix D, "Configurable
Cisco SIP IP Phone Administrator Guide, Release 6.x and 7.x
3-9