How To Customize A Phone-Specific Configuration File - Cisco 7960G Administrator's Manual

How to Customize a Phone-Specific Configuration File

nat_enable: 0; 0-Disabled (default), 1-Enabled
nat_address: ""; WAN IP address of NAT box (dotted IP or DNS A record only)
voip_control_port: 5060; UDP port used for SIP messages (default - 5060)
start_media_port: 16384; Start RTP range for media (default - 16384)
end_media_port: 32766; End RTP range for media (default - 32766)
nat_received_processing: 0; 0-Disabled (default), 1-Enabled
# Outbound Proxy Support
outbound_proxy: ""; restricted to dotted IP or DNS A record only
outbound_proxy_port: 5060; default is 5060
####### New Parameter added in Release 3.0 #######
# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable: 1; 0-Disabled, 1-Enabled (default)
####### New Parameters added in Release 3.1 #######
# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: 1; 0-Disabled, 1-Enabled (default)
# Telnet Level (enable or disable the ability to Telnet into the phone)
telnet_level: 1; 0-Disabled (default), 1-Enabled, 2-Privileged
####### New Parameters added in Release 4.0 #######
# XML URLs
services_url: ""; URL for external Phone Services
directory_url: ""; URL for external Directory location
logo_url: ""; URL for branding logo to be used on phone display
# HTTP Proxy Support
http_proxy_addr: ""; Address of HTTP Proxy server
http_proxy_port: 80; Port of HTTP Proxy Server (80-default)
# Dynamic DNS/TFTP Support
dyn_dns_addr_1: ""; restricted to dotted IP
dyn_dns_addr_2: ""; restricted to dotted IP
dyn_tftp_addr: ""; restricted to dotted IP
# Remote Party ID
remote_party_id: 0; 0-Disabled (default), 1-Enabled
How to Customize a Phone-Specific Configuration File
You can define parameters that are specific to a particular phone, such as the lines configured on a phone
and the defined users for those lines, in a phone-specific configuration file.
Note •
•
Cisco SIP IP Phone Administrator Guide, Release 6.x and 7.x
3-8
If you configure a line to use an e-mail address, that line can be called only by using the e-mail
address. Similarly, if you configure a line to use a number, that line can be called only by using the
number. Each line can have a different proxy configured.
Define the dial_template parameter in the default configuration file for maintenance and control
purposes. Define the parameter in a phone-specific configuration file only if that phone needs to use
a different dial plan than the one being used by the other phones in the same system.
Chapter 3 Initializing Cisco SIP IP Phones