Cisco 7960G Administrator's Manual page 160

Table D-1
Parameter
dst_stop_month
dst_stop_time
dst_stop_week_of_month
dtmf_avt_payload
dtmf_db_level
dtmf_inband
Cisco SIP IP Phone Administrator Guide, Release 6.x and 7.x
D-6
Configuration File Parameters (continued)
Description
(Optional) Month in which DST ends.
Valid values are January, February, March, April, May, June, July,
August, September, October, November, and December or 1 to 12
with 1 being January and 12 being December. When the name of a
month is specified, the value is not case-sensitive. In the United
States, the default is October.
(Optional) Time of day on which DST ends.
Valid values are hour/minute (02/00) or hour:minute (02:00). In the
United States, the default is 02:00.
(Optional) Week of month on which DST ends.
Valid values are 1 to 6 and 8, with 1 being the first week, each
number thereafter being subsequent weeks, and 8 being the last
week in the month regardless of which week the last week is. In the
United States, the default is 8.
(Optional) Configures the payload type for Audio/Video Transport
(AVT) packets.
Range is from 96 to 127. If the value specified is null or invalid,
default is 101.
(Optional) In-band DTMF digit tone level.
Valid values are as follows:
•
•
•
•
•
Default is 3.
(Optional) In-band signaling format.
Valid values are 1 (generate DTMF digits in-band) and 0 (do not
generate DTMF digits in-band). Default is 1.
Appendix D
1—6 dB below nominal
2—3 dB below nominal
3—nominal
4—3 dB above nominal
5—6 dB above nominal
Configurable Parameters for the SIP IP Phone