Table of Contents
Advertisement
Function
• Reviewing how much space has been used/is left on
a memory card
• Formatting a memory card
• Labeling a memory card
Note
To return to Advanced mode from other modes, simultaneously
press and hold the upper button to the left, and the two upper
buttons to the right of the display.
P L A Y / R E C
The
Play/rec
New File
memory card.
R ec o r di ng
The LightCorder can record up to 32 individual shows on a single memory card.
Note
The LightCorder will play a show in a loop unless otherwise
instructed. To avoid sudden scene shifts when a show restarts
it is a good idea to record a similar beginning and ending. For
example, in a show with multiple scenes, record the first scene
again as the final scene.
To record a show:
1 Connect the LightCorder to a DMX control device.
2 From the
3 Create a name for the file using the ↑ and ↓ buttons, or the faders (fader 1 =
UPPER CASE characters, fader 2 = lower case characters, and fader 3 =
12
menu is used to record and play back DMX files. The
option is always shown followed by a list of files that are stored on the
Play/Rec
menu select
Advanced mode
Use menu
"Card Manager"
Create New File
See
page
24
Create
.
Advertisement
Table of Contents
