Table of Contents
Advertisement
S H O W M A N A G E R
The Show Manager is used to manage the files that are saved on the memory card.
You can play, rename, or delete any show.
Playing a show
From the Show Manager menu:
1 Select a file.
2 Select
3 The show will appear ready to play with the message 'Stopped...'
4 Press Play to start the show. During playback you can use the PAUSE button to
break the show - press PAUSE again to continue playback. The show will play
continuously in a loop until stopped.
5 Press STOP to end.
Note that during playback of a show that any of the assignable faders can be used to
directly issue DMX instructions on a single DMX channel. This allows you
independent control of effects during playback of any recorded show. For
information on assigning a fader to a DMX channel see "Advanced mode" on page
11.
Renaming a show
From the Show Manager menu:
1 Select a file.
2 Select
3 Select
4 Create a new name for the file using the ↑ and ↓ buttons, or the faders (fader 1 =
UPPER CASE characters, fader 2 = lower case characters, and fader 3 =
numbers and special characters), to select characters. Use the
Character
22
.
Play Show
Rename Show
.
Yes
to confirm.
button to move to the next position.
a-z
A-Z
Advanced mode
0-9/special characters
Next
Advertisement
Table of Contents
