Options; Changing To Another Mode - Martin LightCorder User Manual

C L E A R I N G A F A D E R
To clear a fader of its assignments:
1 From the
2 Select the appropriate Clear Fader in the menu.
3 Select Yes.
4 Select √ to finish.
O P T I O N S
The Options menu is used to:
• Set the mode that the LightCorder operates in
• Activate communication with the scheduling program on a PC
• Set the date and time
• Set the display contrast
• Calibrate the faders
• Update the LightCorder's control software

Changing to another mode

Modes are used to restrict or modify the functionality that is available for different
tasks and users:
• Player mode is designed for users with no intelligent lighting experience to select
and play a show from those saved on the memory card. No access to recording or
configuration functions is available in this mode. This mode is described in "Player
mode" on page 27.
• Scheduler mode is used for playing back shows according to a schedules developed
using the PC-based LightCorder Scheduler program. Scheduling is described in
"Scheduling" on page 29.
• Pure DMX monitor mode restricts the LightCorder to display DMX information in
real time and is a useful test tool. This mode is described in "Pure DMX monitor
mode" on page 34.
• Fail-safe mode enables the LightCorder to be used as a real-time back-up system if
your DMX controller fails. In this case the LightCorder will start running its default
show until DMX input form the controller is restored. This mode is described in
"Fail-Safe mode" on page 36.
18
select
Control menu
Advanced mode
Assign fader