Table of Contents
Advertisement
S
CHEDULING
Scheduling is performed via communication between the LightCorder and the
Scheduler program running on a PC.
S E T T I N G U P T H E S C H E D U L E
The process is as follows:
1 Record shows using the LightCorder in Advanced mode. See "Recording" on
page 12.
2 Ensure that the time and date are set correctly on the LightCorder (see "Setting
the time" on page 19 and "Setting the date" on page 20).
3 Connect the LightCorder to a Windows PC via the RS-232 cable.
4 Start communication with the PC on the LightCorder. See "Communicating with
a PC" on page 19.
5 Start the LightCorder Scheduler application on the PC.
6 Select the appropriate port using the Communication→Settings menu.
Scheduling
5
29
Advertisement
Table of Contents
