Mira Gem 88 Installation & User Manual page 24

1.9 Fit the concealing plate bracket
assembly over the valve and fix to the
wall with the two retaining screws
(Take care not to damage the foam
seal).
1.10 Fit the concealing plate over the valve.
Make sure that the plastic clips are
aligned centrally on the metal bracket
recess as illustrated. The cut out must
be facing downwards.
Note! Do not silicone seal the
concealing plate to the finished wall
surface.
1.11 The black drive lugs should be at the
12 o'clock and 6 o'clock positions.
Firmly push the flow control lever, with
the handle pointing downwards over the
black lugs.
1.12 Push the flow lever bearing into the
recess on the flow control lever.
Concealing Plate
Bracket Assembly
Plastic Clips
Retaining
Screw
Black Drive Lugs
24
Concealing Plate
Cut Out
Black Drive Lugs
Flow Control
Lever
Flow Lever Bearing