Warning!
The temperature control can be turned from FULL HOT to FULL COLD. As such,
turning the control to full hot will deliver water at the hot water storage temperature.
1.
Turn the flow control lever 1/4 of a full
turn anticlockwise to turn the water on
or clockwise to turn the water off.
2.
Turn the temperature control knob in
the direction of the red arrow for warmer
water and in the direction of the blue
arrow for cooler water, until the desired
temperature of water is obtained.
Note! If this is not the case refer to
section: Reversed inlets.
OPERATION
33
Flow
Temperature