Refitting The Cavity Seal - Mira Gem 88 Installation & User Manual

REFITTING THE CAVITY SEAL

1. Unscrew and remove the two cartridge
retaining screws and remove the
cartridge from the body.
2. Check that the seal on the base of the
cartridge is clean and fitted.
3. Align the cut-outs on the cavity seal
with the screw positions on the
cartridge.
4. Make sure that the pipe recesses on
the cavity seal are aligned as
illustrated.
Seal
Cavity Seal
Screw Position
Pipe Recess
Pipe Recess
Raised Location Feature
30
Cut-out
Screw Position
Cavity Seal
Pipe Recess