Mira Gem 88 Installation & User Manual page 21

2.13 Turn on the water supplies to the
shower mixer and check for any leaks.
2.14 Turn the flow knob fully anticlockwise
for water flow. Operate the temperature
knob and make sure that the directional
hot and cold indicators are correct.
HOT = anticlockwise
COLD = clockwise
Note! If this is not the case, refer to
section: Reversed inlets.
Turn the flow knob fully clockwise to
stop the water flow.
2.15 This completes the installation of the
Mira Gem 88 for connection to rear
entry inlet supplies.
21