Set The Ssid Of The Available Networks - Lancom L-305agn Wireless Manual

In 'Scan bands', define whether the client station scans just the 2.4 GHz,
just the 5 GHz, or all of the available bands to locate an access point.
Under WEBconfig or Telnet the settings for client mode can be found
under the following paths:
Configuration tool
WEBconfig
Terminal/Telnet
5.5.2

Set the SSID of the available networks

In the WLAN clients, the SSIDs of the networks to which the client stations are
to connect must be entered.
To enter the SSIDs, change to the 'General' tab under LANconfig in the
'Wireless LAN' configuration area. In the 'Interfaces' section, select the
first WLAN interface from the list of logical WLAN settings.
Enable the WLAN network and enter the SSID of the network the client
station should log onto.
LANCOM L-300 Access Point Serie
Chapter 5: Advanced wireless LAN configuration
Menu/Table
Expert configuration Setup
modes
Setup/Interfaces/WLAN/
Client modes
Interfaces WLAN Client
77