Operating Access Points In Managed Mode; Status Displays And Interfaces; Status Displays - Lancom L-305agn Wireless Manual

LANCOM L-300 Access Point Serie
Chapter 2: Installation

2.2.2

Operating access points in managed mode

LANCOM Wireless Routers and LANCOM Access Points can be operated either
as self-sufficient Access Points with their own configuration ("Access Point
mode") or as components in a WLAN infrastructure, which is controlled from
a central WLAN-Controller ("managed mode").
2.3

Status displays and interfaces

2.3.1

Status displays

Meanings of the LEDs
In the following sections we will use different terms to describe the behaviour
of the LEDs:
Front side
The L-300 Access Points have status displays on the front panel.
Example:
LANCOM L-305agn
Wireless
24
Wireless LAN adapter or LAN access (if the access point is to be connected
to the LAN).
The LANtools also require a Windows operating system. A web brow-
ser under any operating system provides access to WEBconfig.
Blinking means, that the LED is switched on or off at regular intervals in
the respective indicated colour.
Flashing means, that the LED lights up very briefly in the respective
colour and stay then clearly longer (approximately 10x longer) switched
off.
Inverse flashing means the opposite. The LED lights permanently in the
respective colour and is only briefly interrupted.
Flickering means, that the LED is switched on and off in irregular inter-
vals.
³ » ¿ ´ ²
L-305agn Wireless