Wizard For Lanconfig - Lancom L-305agn Wireless Manual

Your LANCOM has a password protection for the configuration access. This
protection is already activated during the basic configuration by entering a
password.
The device locks access to its configuration for a specified period of time after
a certain number of failed log-in attempts. Both the number of failed attempts
and the duration of the lock can be set as needed. By default, access is locked
for a period of five minutes after the fifth failed log-in attempt.
Besides these general settings you can also check the security settings of the
wireless network with the security wizard as far as your device has a WLAN
interface.
4.3.1

Wizard for LANconfig

Mark your LANCOM in the selection window. Select from the command
bar Extras
Select in the selection menu the setup wizard Control Security Settings
and confirm your choice with Next.
Enter your password in the following windows and select the allowed pro-
tocols for the configuration access from local and remote networks.
In a next step parameters of the configuration lock like number of failed
log-in attempts and the duration of the lock can be adjusted.
Now activate Stateful Inspection, ping-blocking and Stealth mode in the
the firewall configuration.
The wizard will inform you when entries are complete. Complete the con-
figuration with Finish.
Setup Wizard.
LANCOM L-300 Access Point Serie
Chapter 4: Security settings
49