Lancom L-305agn Wireless Manual page 42

tion enabled with a Web browser under name LANCOM or under IP address
172.23.56.254.
http://LANCOM
If the configuration computer does not retrieve its IP address from the
LANCOM DHCP server, it determines the current IP address of the computer
(withStart Run cmd and command ipconfig at the prompt under Win-
dows 2000 or Windows XP, with Start
cfg at the prompt under Windows Me or Windows 9x or with command
ifconfig in the console under Linux). In this case, the LANCOM can be
accessed with address x.x.x.254 (the "x"s stand for the first three blocks in
the IP address of the configuration computer).
Network with DHCP server
If a DHCP server for the assignment of IP addresses is active in the LAN, an
unconfigured LANCOM device disables its own DHCP server, switches to DHCP
client mode and retrieves an IP address from the DHCP server in the LAN.
However, this IP address is initially unknown and accessing the device
depends on the name resolution:
If the LAN also has a DNS server for name resolution and this communi-
cates the IP address/name assignment to the DHCP server, the device can
be reached under
"LANCOM-00a057xxxxxx".
http://LANCOM-00a05700094A
The MAC address on a sticker on the base of the device.

If there is no DNS server in the LAN, or if it is not coupled to the DHCP
server, the device cannot be reached via the name. In this case the follo-
wing options remain:
LANCOM L-300 Access Point Serie
Chapter 3: Basic configuration
http://172.23.56.254
Run cmd and command winip-
name "LANCOM-<MAC address>", e.g.
41