Configuration Protection; Settings For The Wireless Lan; Instructions For Lanconfig - Lancom L-305agn Wireless Manual

LANCOM L-300 Access Point Serie
Chapter 3: Basic configuration
3.1.2

Configuration protection

Using a password secures access to the L-300 Access Point's configuration
and thus prevents unauthorized modification. The device's configuration con-
tains a great deal of sensitive data such as data for Internet access and should
be protected by a password in all cases.


3.1.3

Settings for the wireless LAN

There is a handy installation wizard to help you with the LANCOM Access
Point's wireless LAN configuration. After performing the basic configuration
please execute the wizard to configure the wireless LAN interface
configuration with the wizards in LANconfig').
3.2

Instructions for LANconfig

38
Enter the IP address of a DNS server to resolve domain names if you have
selected 'Off' as the DHCP mode of operation or if another network device
is assuming the role of DNS server in the 'Server' mode of operation.
Multiple administrators can be set up in the configuration of the
LANCOM, each with differing access rights. Up to 16 different admi-
nistrators can be set up for a L-300 Access Point. Further information
can be found in the LCOS reference manual under "Managing rights
for different administrators".
In the managed mode the LANCOM Wireless Routers and LANCOM
Access Points automatically receive the same root password as the
WLAN-Controller, assuming that no root password has been set in the
device itself.
Start up LANconfig by clicking Start
LANconfig. LANconfig automatically detects the new LANCOM devices in
the TCP/IP network.
If an unconfigured device is being found during searching, the setup
wizard starts that will help you make the basic settings of the device or
will even do all the work for you (provided a suitable network environment
exists).
(→ 'WLAN
Programs LANCOM